The next evolution of the Hear Back 8-channel personal monitoring system has arrived – introducing Hear Back OCTO.
With improved audio quality, system performance, and overall ease of use, it revolutionizes monitor mixing on stage or in the studio. Imagine getting your mix exactly the way you want it. With the Hear Back OCTO, you save time and get the sound just right, the first time. This affordable system is perfect for headphones, wired and wireless in-ear monitors, and/or conventional floor monitors.
System Standouts

Virtually unlimited system size
Affordable solution
Excellent audio fidelity
Very long digital cables possible without loss of audio quality
Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel
Local control of up to 10 channels of audio (eight inputs plus a stereo AUX input). Master Volume controls the level of headphones, line outs, and AUX input.
Headphone amplifier fault indicator: In case of overheating or a short, the red LED illuminates to alert the user of a problem
Bus Status Indicator: Confirms proper connection to the Hub
Link Indicators: Whenever two pairs of mono inputs are linked for stereo operation, the link LED is illuminated
Standard CAT5e power and signal connection - a cost effective, simple, unobtrusive way to connect eight channels of audio. The cable is held in place with a built-in cable strain relief.
Balanced line-outs, mono/stereo

Stereo AUX In

Mixer has a built-in mic stand mount for attaching to a standard mic stand or clipping onto a stand extension bar or clip
High power - low distortion headphone amplifiers

System Features
Hear Back OCTO Mixer Features

The Hear Back Mixer is equipped to mount to any standard mic or desk stand using the built-in 5/8" threaded socket located on the back of the mixer.
Local control up to 10 channels of audio
Master volume
Built-in standard mic stand mount
24-bit D/A converters
Bus status indicator
Headphone amplifier fault indicator
Mono/stereo link indicators
Balanced line outs, mono/stereo
Stereo AUX in:

Expand numbers of mixers

Drum module/metronome input

Hear Back OCTO Hub Features
A single Hub supplies signal and power to a maximum of eight Mixers. To expand your system, the Hubs can be daisy-chained using the HearBus In/Out for virtually unlimited system size. The Hub accepts analog input signals from an audio mixer such as auxiliaries, matrix outs, sub outs, monitor outs, and/or direct outputs. The ADAT input can come from digital audio workstations, digital recorders, or digital mixers.

Three switch selectable input sources:

ADAT® Optical

Analog

HearBus

24-bit A/D converters
44.1KHz and 48KHz sample rates
Multi-color, four-level metering
Daisy-chain for expanded systems
Internal universal input power supply
1 RU chassis

Mixer Aux Input
Line Input Configuration / Impedance: Stereo, unbalanced, 10 Kohms typical
Line Input Level: +4 dBu optimal, +22 dBu max

Mixer Headphone Power (Per Channel)

Load Impedance:	THD less than 0.01%*	THD less than 0.1%
8 Ohms:	342 mW	412 mW
16 Ohms:	731 mW	783 mW
25 Ohms:	1.07 W	1.25 W
32 Ohms:	1.37 W	1.6 W
50 Ohms:	1.26 W	1.88 W
100 Ohms:	971 mW	1.03 W
200 Ohms:	512 mW	537 mW
600 Ohms:	185 mW	190 mW
IMD:	Typically Less than 0.02%

Mixer Line Output
Freq Response:
20 Hz to 20 KHz, +/-0.16 dB
THD+N:

0.004% typical at 1 kHz, +18 dBu
0.008% typical, 20 Hz - 20 kHz, +4 dBu

IMD: 0.02% typical at +4 dBu, 60 Hz / 7 kHz
Crosstalk: Less than -85 dB @ 1 kHz
Latency: Less than 1.5 mSec

System Noise Performance
Noise, A-Weighted: -94 dBu @ analog, -97 dBu optical
Dynamic Range: 122 dB typical

System I/O
Hub Line In, Analog: 8 Balanced inputs on DB-25 female (DA-88 pinout)
Hub Max Input Level, Analog: +18 dBu
Hub Light Pipe In: Industry standard fiber optic connector, shuttered
Hub HearBus In, Out: 2x 8-pin RJ45 jack
Mixer Headphone Out: 1x TRS 1/8" and 1x 1/4" unbalanced stereo
Mixer Line Out: 2x TRS 1/4" balanced (left/mono or stereo)
Mixer Max Output Level, Analog: +28 dBu (mixed output)
Mixer Aux Input: TRS 1/8" unbalanced stereo

Physical, Mixer
Size:
5.1" H x 9.3” W x 2.519" D (12.95 cm H x 23.62 cm W x 6.40 cm D)
Unit Weight:
15.8 oz. (0.45 kg)
Mounting:
Standard mic stand (5/8" 27 threads per inch) or desk mounted
Physical, Hub
Size:
1.75" H x 19.0" W x 5.0" D (4.45 cm H x 48.26 cm W x 12.7 cm D)
Unit Weight:
3.9375 lb. (1.79 kg)
Mounting:
Standard rack mount, 1 RU

Power
Hub Power Requirements:
~100-240VAC 125W 50/60Hz
Note: 0 dBu = 0.775 Vrms. Specifications and features subject to change without notice.

Hear Back OCTO Hub

$1,040 Dólares