Tu carrito
Tu carrito está vacío
Josephson Engineering
Josephson C705
$3,100 Dólares
Series Seven Microphones
C705
Josephson Series Seven microphones provide expert users with unprecedented flexibility. The C705 uses the same single-diaphragm capsule used in the C715, but with a transformerless output stage like the C700 and C716, and operated in cardioid only.
The C705 is a versatile studio microphone using a large diameter, center- supported single diaphragm cardioid capsule derived from our C715, and the discrete FET cascode input circuit and symmetrical balanced transformerless output circuit of the C716. The capsule, using a 5 micron gold-metallized diaphragm and precision machined internal surfaces, provides a smooth and very extended high end, and the enhanced proximity effect characteristic of single-diaphragm mics. This combination provides a new range of control for vocal pickup without sibilance, with a variety of tone colors possible by careful selection of distance and angle to the microphone. It’s also excellent for detailed instrument pickup without the harshness typical of many large-diaphragm mics, and works well with a variety of preamps and input stages, due to its low output impedance.
The housing is made of case-hardened steel with a unique offset grille support structure that greatly reduces internal reflections. The entire capsule assembly is internally shockmounted, so the microphone can be attached directly to a stand through its yoke mount. The black finish from the hardening process is very rugged for long life in studio and stage applications.
The design of the C705 includes the best parts of several Josephson microphones, at a lower cost due to using a cardioid-only capsule, a steel housing with a rugged industrial finish rather than a cosmetic plated finish on brass, and an output connector on the microphone body rather than an attached output cable.
Specifications
• Frequency range 20-20,000 Hz
• Sensitivity 15 mV/Pa
• Equivalent noise level <16 dB S.P.L, A weighted
• Overload sound level 130 dB S.P.L
• P48 phantom power, 5.5 mA
• Diameter 63 mm (100 mm wide at yoke), length 261 mm Weight 1.2 kg
• Output connector 3-pin XLR
Josephson Engineering
Josephson C705
$3,100 Dólares
Fecha estimada de entrega Octubre 27 and Octubre 29. *
Garantía del Precio Más Bajo
Descuento por Compras Mayores
Facturaciones
Meses Sin Intereses con PayPal
$3,100 Dólares
$3,100 Dólares
Producto Original
Series Seven Microphones
C705
Josephson Series Seven microphones provide expert users with unprecedented flexibility. The C705 uses the same single-diaphragm capsule used in the C715, but with a transformerless output stage like the C700 and C716, and operated in cardioid only.
The C705 is a versatile studio microphone using a large diameter, center- supported single diaphragm cardioid capsule derived from our C715, and the discrete FET cascode input circuit and symmetrical balanced transformerless output circuit of the C716. The capsule, using a 5 micron gold-metallized diaphragm and precision machined internal surfaces, provides a smooth and very extended high end, and the enhanced proximity effect characteristic of single-diaphragm mics. This combination provides a new range of control for vocal pickup without sibilance, with a variety of tone colors possible by careful selection of distance and angle to the microphone. It’s also excellent for detailed instrument pickup without the harshness typical of many large-diaphragm mics, and works well with a variety of preamps and input stages, due to its low output impedance.
The housing is made of case-hardened steel with a unique offset grille support structure that greatly reduces internal reflections. The entire capsule assembly is internally shockmounted, so the microphone can be attached directly to a stand through its yoke mount. The black finish from the hardening process is very rugged for long life in studio and stage applications.
The design of the C705 includes the best parts of several Josephson microphones, at a lower cost due to using a cardioid-only capsule, a steel housing with a rugged industrial finish rather than a cosmetic plated finish on brass, and an output connector on the microphone body rather than an attached output cable.
Specifications
• Frequency range 20-20,000 Hz
• Sensitivity 15 mV/Pa
• Equivalent noise level <16 dB S.P.L, A weighted
• Overload sound level 130 dB S.P.L
• P48 phantom power, 5.5 mA
• Diameter 63 mm (100 mm wide at yoke), length 261 mm Weight 1.2 kg
• Output connector 3-pin XLR
Autenticidad Garantizada
No se arriesgue a comprar imitaciones con vendedores ilegítimos. Audio Gate es distribuidor autorizado. Aparecemos en la página de los fabricantes y sólo ofrecemos producto original ¡Garantizado!
- Seleccionar una opción actualiza la página completa.
- Se abre en una ventana nueva.