-
Descripción del Producto
- Multipattern large diaphragm microphone with 5 polar patterns (omni, wide cardioid, cardioid, hypercardioid, figure-eight)
- Navigation switch with LED illuminated display for polar pattern, PAD and low cut
- Sound characteristics: transparent, natural reproduction of human voice, outstanding transient response
- Balanced sound in all 5 polar pattern settings
- Vocals and speech with optimized handling of sibilant sound
- Main microphone in orchestral recordings or spot microphone particularly suggested for string, woodwind and brass instruments
- Recording of extreme S.P.Ls (drum and percussion, guitar amp etc.)
- Broadcast (radio drama, ADR), film & game sound production, professional recording studios,
home recording
Multi-faceted versatility, no-compromise sound and innovative operation: With five directional characteristics and a novel operating concept, the TLM 107 provides sound without any coloration. Featuring equally impressive level handling and low self-noise, it captures everything from the softest whisper to thundering drums.
Classic proportions combined with attractive styling and fresh ideas – the TLM 107 perfectly embodies the Neumann philosophy: Innovation based on tradition. Far from evoking vintage nostalgia, the standard-setting TLM 107 represents an impressive, modern studio microphone. Its extensive performance spectrum and high-precision reproduction, very close to the original, make the TLM 107 universally applicable, opening up the widest freedom in mixing and post-production.
Feautures:Acoustical operating principle Pressure gradient transducer Directional pattern Omni, wide angle cardioid, cardioid, hypercardioid, figure-8 Frequency range 20 Hz ... 20 kHz Sensitivity at 1 kHz into 1 kohms 11 mV/Pa Rated impedance 50 ohms Rated load impedance 1000 ohms Equivalent noise level, CCIR1) 22 dB Equivalent noise level, A-weighted1) 10 dB-A Signal-to-noise ratio, CCIR1) (rel. 94 dB S.P.L) 72 dB Signal-to-noise ratio, A-weighted1) (rel. 94 dB S.P.L) 84 dB Maximum S.P.L for THD < 0.5%2) 141 dB Maximum S.P.L for THD < 0.5%2) with pre-attenuation -6 dB 147 dB Maximum S.P.L for THD < 0.5%2) with pre-attenuation -12 dB 153 dB Maximum output voltage 10 dBu Supply voltage (P48, IEC 61938) 48 V ± 4 V Current consumption (P48, IEC 61938) 3.2 mA Matching connectors XLR3F Weight 445 g Diameter 64 mm Length 145 mm _________________________________________________________________
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal -
Reseñas
-
-
Detalles del Producto
- Variante: Nickel
- Marca: Neumann