Tu carrito
Tu carrito está vacío
Josephson Engineering
Josephson C617
$1,445 Dólares
The Josephson C617 is the second generation of our high voltage metal diaphragm omnidirectional microphone, suitable for the most critical sound recording and measurement applications. It operates from standard P48 phantom power yet provides full 200 volt polarize potential for a lab grade standard “half inch” microphone capsule. The C617SET is supplied with a Microtech Gefell MK221 capsule. The dynamic range is dependent on the inherent noise of the microphone capsule and the limits of P48 phantom power. The Josephson cascode FET front end circuitry introduced in the C606 is further refined in the C617, combined with our traditional balanced bipolar class-A symmetrical output stage.
For music recording, the Josephson balanced symmetrical circuitry together with a sub-micron thickness metal diaphragm capsule translate to the purest, most open sound possible. Pickup of sound pressure alone results in no proximity effect, very low sensitivity to wind noise, and phase accuracy that cannot be obtained with directional microphones. Spot-miking applications or overall stereo pickups using spaced pairs take on a new level of detail and precision not possible with other types. The small capsule size results in a nearly perfect omnidirectional pattern for accurate pickup of the wholeacoustic environment.
Specifications of C617SET
- Frequency Response: 10 Hz – 20 kHz ±1 dB
- Equivalent noise level: 14 dB S.P.L, A-weighted
- Sensitivity: 66 mV/Pa (-24 dB ref 1V/Pa)
- Maximum output level: +7dBV for <1% THD, 1k Ω load (127 dB S.P.L)
- Output impedance: 50Ω (minimum load impedance 1k Ω)
- Power requirements: P48 phantom per IEC 61938, <5 mA
- Temperature Range, -10 to +50°C
- Dimensions: 21mm dia, 176mm long (with capsule)
- Weight: 120g
Specifications of C617 body alone, for use with other capsules, as above except:
- Frequency Response: 10 Hz – 80 kHz ±1 dB
- Equivalent noise level: <2.5μ V A-weighted, <6.5μ V CCIR quasi-peak Gain 2.5 dB (balanced symmetrical direct coupled output)
- Maximum output level: +7dBV for <1% THD, 1kΩ load
- Output impedance: 50Ω (minimum load impedance 1kΩ)
- Capsule polarization: 200V
- Dimensions: 21mm dia, 165mm long (with capsule)
- Weight: 110g
Josephson Engineering
Josephson C617
$1,445 Dólares
Fecha estimada de entrega Octubre 28 and Octubre 30. *
Garantía del Precio Más Bajo
Descuento por Compras Mayores
Facturaciones
Meses Sin Intereses con PayPal
$1,445 Dólares
$1,445 Dólares
Producto Original
The Josephson C617 is the second generation of our high voltage metal diaphragm omnidirectional microphone, suitable for the most critical sound recording and measurement applications. It operates from standard P48 phantom power yet provides full 200 volt polarize potential for a lab grade standard “half inch” microphone capsule. The C617SET is supplied with a Microtech Gefell MK221 capsule. The dynamic range is dependent on the inherent noise of the microphone capsule and the limits of P48 phantom power. The Josephson cascode FET front end circuitry introduced in the C606 is further refined in the C617, combined with our traditional balanced bipolar class-A symmetrical output stage.
For music recording, the Josephson balanced symmetrical circuitry together with a sub-micron thickness metal diaphragm capsule translate to the purest, most open sound possible. Pickup of sound pressure alone results in no proximity effect, very low sensitivity to wind noise, and phase accuracy that cannot be obtained with directional microphones. Spot-miking applications or overall stereo pickups using spaced pairs take on a new level of detail and precision not possible with other types. The small capsule size results in a nearly perfect omnidirectional pattern for accurate pickup of the wholeacoustic environment.
Specifications of C617SET
- Frequency Response: 10 Hz – 20 kHz ±1 dB
- Equivalent noise level: 14 dB S.P.L, A-weighted
- Sensitivity: 66 mV/Pa (-24 dB ref 1V/Pa)
- Maximum output level: +7dBV for <1% THD, 1k Ω load (127 dB S.P.L)
- Output impedance: 50Ω (minimum load impedance 1k Ω)
- Power requirements: P48 phantom per IEC 61938, <5 mA
- Temperature Range, -10 to +50°C
- Dimensions: 21mm dia, 176mm long (with capsule)
- Weight: 120g
Specifications of C617 body alone, for use with other capsules, as above except:
- Frequency Response: 10 Hz – 80 kHz ±1 dB
- Equivalent noise level: <2.5μ V A-weighted, <6.5μ V CCIR quasi-peak Gain 2.5 dB (balanced symmetrical direct coupled output)
- Maximum output level: +7dBV for <1% THD, 1kΩ load
- Output impedance: 50Ω (minimum load impedance 1kΩ)
- Capsule polarization: 200V
- Dimensions: 21mm dia, 165mm long (with capsule)
- Weight: 110g
Autenticidad Garantizada
No se arriesgue a comprar imitaciones con vendedores ilegítimos. Audio Gate es distribuidor autorizado. Aparecemos en la página de los fabricantes y sólo ofrecemos producto original ¡Garantizado!
- Seleccionar una opción actualiza la página completa.
- Se abre en una ventana nueva.