Distribuidor Oficial de Pro Audio High-End

Schoeps MK8 figura 8

$1,095 Dólares


- +

Schoeps MK8 figura 8

$1,095 Dólares


Default Title

  • Descripción del Producto


      • Figure-8 characteristic (pure pressure-gradient transducer)
      • Pickup direction: Lateral (perpendicular to the microphone axis)
      • 0°-axis marked with a red dot
      • Preferred application: M/S, double M/S and "Blumlein" stereo

      The MK 8 is often used for M/S and double M/S stereo sound in film sound and music recording, in combination with Colette or CCM microphones and/or a CMIT shotgun microphone.

      This type of capsule is a pure dipole. The figure-eight pattern of the MK 8 remains constant from low to high frequencies, which is particularly important when used in an M/S setup. Its sensitivity rolls off more at low frequencies than other capsules, but proximity effect (which can compensate, given relatively close placement) is also more pronounced.

      Production of the MK 8 is a special technical accomplishment, because in terms of physics, the available force due to the pressure gradient is minimal. Despite this, the MK 8 has excellent frequency and polar response, near-perfect front/back symmetry, and low inherent noise.

      The microphone is comparatively sensitive to solid-borne sound as well as wind and breath noise. Good protection should be considered, e.g. suitable wind screening and/or shock mounting.

      The pickup direction is lateral, i.e. perpendicular to the microphone housing, and the 0° and 180° axes are indicated respectively by red and black dots on the capsule housing. When recording with M/S, the 0° axis (as viewed from a position behind the microphone) should point to the left, and the "8" engraved on top of the capsule should be precisely horizontal.


      Pickup pattern


      Frequency range

      40 Hz - 15 kHz with CMC6,

      40 Hz - 15 kHz with CMC6xt (above 20 kHz, the level of -3 dB for the cutoff frequency is not exceeded despite the xt boost)


      -38,5 dB (V/Pa), 12 mV/Pa with CMC 6

      Equivalent noise level (A-weighted)

      17 dB with CMC 6

      Equivalent noise level (CCIR)

      26 dB with CMC 6

      Signal-to-noise ratio (A-weighted)

      77 dB with CMC 6

      Maximum sound pressure level (THD < 0.5 %)

      133 dB-S.P.L with CMC 6


      34 mm


      20 mm


      18 g

      Surface Finish

      matte gray
      custom color:
      nickel, chromagree

  • Reseñas
  • Detalles del Producto