Distinctive design. Sonic accuracy. Legendary performance.
Explore the Earthworks SR314.
The instrument for vocalists.
The Earthworks SR314 is designed from the ground up to meet both the expectations and desires of a modern live performance environment.
The Sound of the SR314
An extended flat frequency response and a focus on time coherence sets the Earthworks SR314 apart. By systematically eliminating the many layers of distortion and noise normally added by each acoustic and electronic component, the Earthworks SR314 doesn’t sound like a traditional microphone – it pulls back the veil to reveal the true voice of the artist.
Simple, Easy and Brilliant
The SR314 democratizes exceptional live music experiences, making them accessible to everyone. Quicker soundchecks and better monitor and in-ear mixes let artists focus on what matters most – the music. Engineers are unencumbered from the necessities of corrective EQ, heavy compression, de-essing and constant vigilance against feedback. Audiences reap the benefits of vocals that sit comfortably and easily in the mix, with every detail and nuance bridging the gap that so often separates the audio experience of live music from recordings.
The SR314 goes beyond the promise of a studio mic inserted into a live space by directly addressing the challenges and pitfalls intrinsic to these dynamic environments:
- Tight cardioid polar pattern with a consistent frequency response all the way out to 90 degrees means the SR314 delivers the same quality of sound even when the singer moves off-center.
- Extreme attenuation of sound sources located beyond 90 degrees with maximum rejection at 180 degrees.
- Consistent low frequency response across a wide range of distances, providing articulate detailed bass up close while not getting thin with distance.
- The combination of these features imbues the SR314 with levels of feedback immunity and isolation from unwanted sound sources not found in other microphones.
Seamlessly Transition Between Worlds
The SR314 doesn’t just deliver studio quality on stage. It is a vocal microphones that can seamlessly transition between those two worlds without compromising anything in terms of performance. It is the microphone that you both want to use for both onstage performances and studio recordings and is the best microphone for the job.
- Frequency Response: 20Hz – 30kHz
- Polar Pattern: Cardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 24-48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Signal-to-Noise Ratio: 79dB A-weighted
- Output: XLR (pin 2+)
- Output Impedance: 65Ω balanced (between pins 2 & 3)
- Min Output Load: 600Ω between pins 2 & 3
- Noise: 15dB SPL equivalent (A weighted)
- Dimensions (L x D): 181.1mm x 40.6mm (7.13 x 1.60 inches)
- Weight: 1.5 lb. (.68kg)